Best 1TB PCIe 3.0 Plextor SSDs
There are 8 1TB PCIe 3.0 Plextor SSDs compared here. The fastest is the Plextor M9Y+ AIC at 3400 MB/s read at 1TB, and the highest-rated for endurance is the Plextor M8PeY (768 TBW). Sequential reads across the group span 2500–3400 MB/s at 1TB.
Why this configuration
A 1TB PCIe 3.0 Plextor SSD is an affordable NVMe step up from SATA. Gen3 is roughly six times SATA's throughput yet often costs little more, making it the easy default for a first NVMe drive or a laptop that only supports Gen3. Plextor specifically tends to be chosen here for its firmware track record and warranty support.
1TB is the capacity most single-drive builds settle on.
Usually chosen for: budget builders, laptop upgraders and anyone leaving SATA behind.
Good fit: mainstream desktop and laptop builds.
Ranked list
Speeds on this page are the manufacturer's 1TB ratings where published (8 of 8 drives), not the family headline figure. Rated writes at 1TB run 1400–2200 MB/s.
| # | Model | Tier | Controller | Read MB/s (at 1TB) | TBW | |
|---|---|---|---|---|---|---|
| 1 |  Plextor M9Y+ AIC 250GB, 500GB, 1TB | High-end | Marvell 88SS1092 (3-Core ARM Corte | 3400 | 640 | Find on Amazon |
| 2 |  Plextor M9P+ 250GB, 500GB, 1TB | High-end | Marvell 88SS1092 (3-Core ARM Corte | 3400 | 640 | Find on Amazon |
| 3 |  Plextor M9Pe 250GB, 500GB, 1TB | High-end | Marvell 88SS1093 "Eldora" | 3200 | 640 | Find on Amazon |
| 4 |  Plextor M9PeG 250GB, 500GB, 1TB | High-end | Marvell 88SS1093 "Eldora" | 3200 | 640 | Find on Amazon |
| 5 |  Plextor M8PeY 128GB, 250GB, 500GB, 1TB | High-end | Marvell 88SS1093 | 2500 | 768 | Find on Amazon |
| 6 |  Plextor M8PeG 128GB, 250GB, 500GB, 1TB | High-end | Marvell 88SS1093 | 2500 | 768 | Find on Amazon |
| 7 |  Plextor M9PeGN 250GB, 500GB, 1TB | Mid-range | Marvell 88SS1093 "Eldora" | 3200 | 640 | Find on Amazon |
| 8 |  Plextor M8PeGN 128GB, 250GB, 500GB, 1TB | Mid-range | Marvell 88SS1093 | 2500 | 768 | Find on Amazon |
The parts, explained
1TB is the mainstream single-drive capacity.
PCIe 3.0 x4 reaches about 3,500 MB/s — plenty for everyday use and gaming, and cheaper than Gen4.
Staying with Plextor means consistent firmware, tooling and warranty handling across the range.